JVC CL-S500 Series Operation Manual page 6

UK Responsible Person
JVCKENWOOD U.K. Limited
First Floor, Gleneagles, The Belfry, Colonial Way, Watford, Hertfordshire
WD24 4WH, UNITED KINGDOM
Warning
● This apparatus must be earthed because of Class I equipment.
● This apparatus is not a patient contact equipment.
● When using at 240 V in the United States, supply must be from center-tapped, 240 V,
single phase circuit.
● Consult your dealer about waste disposal.
● This apparatus shall not to be used in the vicinity of the patient, which is the space
with surfaces likely to be contacted by the patient or an attendant who can touch the
patient. This encloses a space within the room 1.83 m (6 feet) beyond the perimeter of
the bed in its intended location, and extending vertically 2.29 m (7-1/ 2 feet) above
the floor.
Equipment classification
● Type of protection against electric shock: Class I equipment
● Protection against harmful ingress of water: Ordinary Equipment (IPX0)-No
protection.
● Not suitable for use in the presence of flammable anesthetics or oxygen.
● Mode of operation: Continuous operation
Power cord important information
Caution:
Please use the power cord provided with this monitor in accordance with the table
below. If a power cord is not supplied with this product, please contact your dealer.
For all other cases, please use a power cord that matches the AC voltage of the power
outlet and has been approved by and complies with the safety standards of your
particular country. When you use this monitor for medical in North America, you
should use a North America Hospital Grade power cord.
Country
Plug Shape
Standard
Voltage
U.S.A./Canada
UL/CSA
120
- 6 -
EU
VDE, Demko,
Nemko, BSI, etc.
230
Japan
or
PSE
100