JVC CL-S500 Series Operation Manual page 18

Do not place the monitor on its back or use in a place with little
ventilation.
Heat could build up and damage the cabinet and/or the inner parts.
It could result in shortening of life, overheat, and/or fire.
Rest your eyes for 10 to 15 minutes per hour.
Failure to do so could cause eyestrain.
Disconnect the power cord if abnormalities such as smoke and fire,
etc. are observed.
Do not position the monitor so that it is difficult to operate the
disconnection.
This product can be reused only if it is reconditioned under our
responsibility.
Please report to us and the authority of the member state if in any
serious incident that has occurred in relation this product.
Even if it is used properly, the monitor may cause harmful
interference to radio or television reception.
Try the following measures to correct it.
• Increase the distance between the monitor and the radio/TV.
• Connect the monitor into a different outlet from the one to which the
radio/TV is connected.
Do not press, scratch, or put objects on the LCD screen.
It could cause monitor noise and/or cause the panel to fail.
Do not display a static image for too long.
It could cause "ghosting", a phenomenon where the previous image
displayed on the screen is seen for moments after the image has changed.
Turn on a screensaver or enable the stand-by mode to avoid "burning
in", the burning of an image onto the LCD panel after hours of the
same image being displayed.
Please be advised that the following symptoms may occur due to the
nature of LCDs. They are not failures.
• During use in cold environments, "streaking" may occur or images
may appear dark.
• Depending on use conditions such as temperature, spots or
unevenness in luminance or color may be observed.
• Due to the manufacturing technology used, there may be pixel or
dot failures even though its rate of effective pixels is 99.999301 %.
LCD
- 18 -