JVC CL-S500 Series Operation Manual page 11

portable and mobile RF communications equipment and the model CL-S500
The model CL-S500 is intended for use in an electromagnetic environment in which radiated RF
disturbances are controlled. The customer or the user of the model CL-S500 can help prevent
electromagnetic interference by maintaining a minimum distance between portable and mobile
RF communications equipment (transmitters) and the model CL-S500 as recommended below,
according to the maximum output power of the communications equipment.
Immunity to proximity fields from following RF wireless communication equipment has been
confirmed:
Test
Bandwidth
frequency
(MHz)
(MHz)
385 380–390
450 430–470
710
745 704–787
780
810
871 800–960
930
1720
1845 1700–1990
1970
2450 2400–2570
5240
5500 5100–5800
5785
a): For some services, only the uplink frequencies are included.
b): The carrier shall be modulated using a 50 % duty cycle square wave signal.
Recommended separation distances between
a)
Service Modulation
a)
Pulse
TETRA 400
modulation
FM
GMRS 460, ±5 kHz
FRS 460 deviation
1 kHz sine
Pulse
LTE Band
modulation
13, 17
217 Hz
GSM
800/900,
Pulse
TETRA 800,
modulation
iDEN 820
18 Hz
CDMA 850,
LTE Band 5
GSM 1800;
CDMA
1900;
Pulse
GSM 1900;
modulation
DECT;
217 Hz
LTE Band 1,
3, 4, 25;
UMTS
Bluetooth,
WLAN,
Pulse
802.11 b/g/
modulation
n,
217 Hz
RFID 2450,
LTE Band 7
Pulse
WLAN
modulation
802.11 a/n
217 Hz
Minimum
Maximum
separation
power
b)
distance
(W)
(m)
1.8 0.3
b)
2 0.3
0.2 0.3
b)
2 0.3
b)
2 0.3
b)
2 0.3
b)
0.2 0.3
b)
- 11 -
IEC/EN
Compliance
60601
level
test level
(V/m)
(V/m)
27 27
28 28
9 9
28 28
28 28
28 28
9 9