Sony SLV-D300P Operating Instructions Manual page 91

Attaching the external antenna connector
When using a 300*ohm twin lead cable for a
VHF/UHF antenna, use an antenna connector
(not supplied) to connect the antenna to the
DVD*VCR.
300-ohm twin
lead cable
Antenna
connector (not
supplied)
Loosen the screws on the antenna connector.
Wind the twin leads around the screws on the antenna connector.
Retighten the screws.
Attaching
a UHFNHF band mixer
When using both a 75-ohm coaxial cable and
a 300-ohm twin lead cable for a VHF/UHF
antenna, use a UHF/VHF band separator/
mixer (not supplied) to connect the antenna
to the DVD-VCR.
'3°°a7%:'°
g
75-ohm coaxial -===_
cable
Loosen the screws on the mixer.
Wind the twin leads around the screws on the mixel:
Retighten the screws.
Connect the 75-ohm coaxial cable to the mixer.
UHF/VHF
band
separator/
mixer (not
supplied)
Q.
O
=_
O
General setup information
91