Sony SLV-D300P Operating Instructions Manual page 38

To watch another TV program while recording
Press TV/VIDEO to display "TV" in the display window.
]
T I I vc"/
! \1
J
If your TV is connected to the VCR using AIV connections, set the TV to the
TV's antenna
input;
if not,
skip this step.
Select another channel on the TV.
To watch a DVD while recording
Press SELECT DVD to control the DVD player.
Press "& and place the disc on the disc tray.
Press [2:> PLAY.
The disc 1ray closes and the DVD player stm_s playback. The TV screen will
automatically change to 1he DVD playback screen.
To save a recording
"Ib prevent accidental erasure, break
off the safety tab as illuslrated. "Ib
record on the tape again, cover the tab
hole with adhesive tape.
Tips
• _[_)select a channel, you can use the
J(_ Safety tab
number buttons on the remote commander. Enter the channel number, then press ENTER.
• You can select a video soume from the LINE IN 1 or LINE-2 1N jacks using the INPUT
SELECT button.
• The display appears on the TV screen indicating information about the tape, but the
information will not be recorded on the tape.
• If you do not want to watch TV while recording, you can turn off the TV. When using a cable
box, make sure to leave it on.
Notes
• The remaining tape length may not be indicated accurately ftw short tapes such as T-20 or
T-30, or tapes recorded in the LP mode.
• it may take up to one minute for the VCR to calculate and display the remaining tape length
after you press DISPLAY.
• You cannot record a DVD k) a VCR tape.
• "Ib watch a TV program during video recording, stop disc playback.
38
Recording TV programs