Sony SLV-D300P Operating Instructions Manual page 17

Hookup 2 : DVD-VCR setup
Plug the DVD-VCR into an AC outlet.
The DVD-VCR automatically presets the DVD-VCR's clock and TV channels
when the DVD-VCR is plugged into the AC outlet.
_-_! AC power cord
to AC outlet
The DVD-VCR starts presetting the
clock and channels.
current time appears in the display [ "I I ]
U
You have now completed DVD-VCR setup.
To change the on-screen display language to French or Spanish, see
"Step 4 : Selecting a language" on page 19.
The clock is set using a time signal provided by some TV channels. If the clock
is incorrect, or "--:-" appears in the display window, see "Using Manual Clock
Set" on page 22.
To add or disable channels manually, see "Presetting/disabling channels
manually" on page 26.
Notes
• If you
connect the AC power
cord before the m_tenna connections are completed, the channels
m_y be incorrectly set. If this happens, see "Step 6 : Presetting channels" on page 24.
• Do not wess any buttons on lhe DVD-VCR or remote commander during Auto preset.
• Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the DVD-VCR.
• Auto preset can be performed by pressing • STOP on tile refit continuously for 5 seconds or
more with the DVD-VCR power lurned off2
continued
Basic hookups
17