Sony SLV-D300P Operating Instructions Manual page 30

TO watch slow motion in continuous play mode (DVD and VIDEO CD
only)
Press II PAUSE, then press _ SLOW |1--. With each press, the playback speed
changes cyclically as follows.
[_ 1/B _ 1/4 _ 1/2
To resume normal playback, press 12>- PLAY.
Notes
• You can chm_ge the screen type using the "SCREEN SETUP" menu. (See "Screen Setup" on
page 51 )
• Do not perform VIDEO playback while playing back a disc.
• If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the
point oldie scratch.
• You cannot change the MP3 or the Multi Session CD playback speed.
• VIDEO CD fast forward/reverse and slow motion play cannot be paused.
• When playing a chapter with multi-angles on a DVD in slow motion, you cannot change fl_e
slow motion playback speed (1/2 only).
• During CD fast forward/reverse play. no sound is output.
• The PROGRESSIVE button is not available when fl_e DVD player is in play mode. Use the
PROGRESSIVE button in stop mode.
Notes on playing DTS* sound tracks on a CD
• When
playing DTS-encoded CDs, excessive noise will be heard from the mmlog stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
when the analog stereo jacks of the DVD player are connected to an amplification system. To
enjoy DTS Digital Surround IM playback, an external 5. I-channel decoder system must be
connected to the digital jack of the DVD player.
• Set the sound to "STEREO" using the AUDIO button when you play DTS sound tracks on a
CD (page 69).
• Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL or OPTICAL)jack even if"DTS" is set to "Off" in
"AUDIO SETUP" menu (page 49), m_d may affect your ears or cause your speakers to be
damaged.
Notes on playing DVDs with a DTS sound track
• DTS audio signals are output only fl_rough the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack.
• When you play a DVD with DTS sound tracks, set "DTS" to "On" in "AUDIO SETUP"
menu (page 49).
• If you connect file player to audio equipment wiflmut a DTS decoder, do not set "DTS" to
"On" in "AUDIO SETUP" menu (page 49). A loud noise may come out from the speakers,
affecting your ears or causing the speakers to be damaged.
* "DTS" and "DTS Digital Out" are trademarks of Digital Theater Syslems, Inc.
30 Playing discs