Sony SLV-D300P Operating Instructions Manual page 22

Notes
• The clock cmmot be set automatically if you do not receive a channel that c_rries a time
signal in your area. If so, set the clock manually (page 22).
• If there are only a few channels in your area that carry time signals, setting fl_e clock
automatically may take up to about 20 mbmtas. If nothing happens even a_er you wait about
20 minutes, set the clock m_nually (page 22).
• If you made Hookup 3, make sure you leave 4_e cable box on.
• To record TV programs using the timer, you must set the clock accurately.
• The clock display appears when VIDEO mode is selected with no tape inserted or when the
DVD-VCR is mined off.
Using Manual Clock Set
Before you start..,
• Turn on the DVD-VCR and your TV.
• "lb control the DVD-VCR, set TV /
_to_onthe
remote (page 9).
• Set the "RF Output Channel" to "3CH" or
"4CH" in "OPTION SETUP" menu
(page 89). If your TV is connected to the
DVD-VCR using A/V connections, set the
TV to video input.
• if the DVD pl_yer is in play mode, you
cannot display the "SETUP MENU." Stop
the DVD playback.
o@oo
ooo
OOQQ
@®@
---_ SET UP
--==ENTER
--'d%RETURN
1
2
SETUP Press SET UP.
O The "SETUP MENU"
appears.
8_UPM_U
Press t/_,/<-/,,_ to select i_ (Clock Set/
Adjust), then press ENTER.
The "CLOCK SET/ADJUST" menu appears. MamJ_J
22
Setting the clock