Sony SLV-D300P Operating Instructions Manual page 45

[] Use this hookup if your AN reciever has a Dolby Digital or DTS*
decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of
your AV amplifier (receiver). You are not able to enjoy the surround sound effects of
this playel: You must make connections using 11_1 and 1_.
* "DTS" m_d "DTS Digital Out" are trademarks of Digital Theater Systems, Inc.
DVD-VCR
UNE UNE red)
AUDIO
to LINE OUT L/R (AUDIO}
_: Signal flow
to audio inou[
[Speakers
Rear L_ Subwoofer
C1
Rear (R)
Stereo audio cord
rio[ Supplt_
ana
m
Coaxial digital cora
{nol supp_ea)
or
l @_iiUv!!i?!)an£g TIOAL _"
P
¢D
Z
O
g
tO coaxial or optical
digital mou[
iSpeakersl
AV amplifier receiver) having
a decoder
Front ILl Center
Front (R)
Note
• After you have completed the connection, be sure to set "Dolby Digital" tu "Dolby Digital"
and "DTS" lo "On" in "Audio Setup" (page 48). Otherwise, no sound or a loud noise will
come from dae speakers.
AN Receiver hookup
45