ZyXEL Communications ZyAIR G-3000H Firmware Release Notes page 8

www.zyxel.com
3. [BUG FIXED]
AP+bridge mode performance is unstable. (Bridge/Repeater mode is fine)
4. [BUG FIXED]
In MIB browser, use AUTO CONFIGURATION Remote Triggering command to update
configuration more than 3 times, DUT would reboot with error message.
5. [BUG FIXED]
SNMP:MIB-pwTrap(1.3.6.1.4.1.890.1.9.2)[Wireless trap / StationAssociated] [Deassociated]
[FailAssociate] [FailAuthenticate] trap function doesn't work properly.
6. [BUG FIXED]
eWC: Fix incorrect output at Wireless - Channel Usage if SSID is empty.
Modification in 3.50(AAC.1)b4 | 09/14/2005
1. [BUG FIXED]
SNMP autocfg function doesn't work properly.
2. [BUG FIXED]
There are some issues in WPA2-MIX and WPA2-PSK-MIX mode.
3. [FEATURE CHANGED]
Change MIB name from PROWIRELESS-MIB to ZYXEL-PROWIRELESS-MIB.
4. [FEATURE CHANGED]
Modify limitation of minimum RTS threshold from 0 to 800.
5. [FEATURE CHANGED]
Modify eWC wizard setup. Now it will write appreciate setting to SSID profile 1 and security
profile 1 automatically.
6. [FEATURE ENHANCED]
Change MESSID operation. Now only the first selected SSID will response broadcast probing
request. The others will act as they are hidden SSIDs.
7. [FEATURE ENHANCED]
Support WLM EMS 1.0.
Modification in 3.50(AAC.1)b3 | 08/30/2005
1. [BUG FIXED]
After config SSID profile from Web, then select SSID profile from SMT 3.5 with operating
mode=AccessPoint, device will reboot.
2. [BUG FIXED]
In eWC, when operating mode = AP+Bridge, and AP security is enable ( wep 802.1x, wpa or
wpa2 ), then " Enable WDS Security " function enable or not, the WDS always can connect.
3. [BUG FIXED]
Change the output power config items of eWC and SMT 3.5 to be the same.
ZyXEL Confidential
8/23