Supported Platforms - ZyXEL Communications ZyAIR G-3000H Firmware Release Notes

www.zyxel.com
ZyXEL ZyAIR G-3000H Standard Version
Date: March 28, 2007

Supported Platforms:

ZyXEL ZyAIR G-3000H
Versions:
ZyNOS Version
Bootbase Version
Notes:
1. ZyAIR G-3000H is a country dependent product. Please setup correct country code before
shipping.
2. When AP is working under MESSID mode and security mode is WEP, 8021X-STATIC64, or
8021X-STATIC128 ( which use static WEP key for encryption / decryption ), only key1 is
usable, no matter which key index is assigned in the security profile. This implies that all
clients can only, and must set WEP key index 1. Other key index will be meaningless.
3. Please use eWC ( WEB ) or CI command to edit SSID profile properties. SMT doesn't
support SSID profile edit.
4. If STA1 and STA2 connected to same BSS, but got different VLAN number from RADIUS
server, the traffic between STA1 and STA2 won't be blocked when intra-BSS traffic is
enabled.
5. When AP is running under MESSID mode, the first entry of selected SSID profiles will be
visible. The term "visible" here means AP will send probe response of that SSID when it
receives probe request which is broadcast or doesn't include any specific SSID. This will
affect client's wirelesss scan result. For example, if user enabled SSID profile index 3, 5, 7
under MESSID mode and SSID profile index 3 is at the first entry of eight available selections,
then SSID profile 3 will be visible. If the first entry of eight available selections is not
enabled, then no SSID will be visible.
ZyXEL Confidential
Release 3.50(AAC.5)C0
Release Note
: V3.50(AAC.5)C0 | 03/28/2007 10:14:57
: V1.03 | 05/25/2005 16:49:07
2/23