Table of Contents
Advertisement
AXIS P9117–PV Corner Camera
Configure your device
•
For environments with certain artificial light and bright light, for example outdoors with fluorescent lighting at night and
sun during daytime, select Flicker-reduced.
Select the same frequency as the power line frequency.
•
To lock the current exposure settings, select Hold current.
Reduce noise in low-light conditions
To reduce noise in low-light conditions, you can adjust one or more of the following settings:
•
Adjust the trade-off between noise and motion blur. Go to Video > Image > Exposure and move the Blur-noise trade-off
slider toward Low noise.
•
Set the exposure mode to automatic.
Note
A high max shutter value can result in motion blur.
•
To slow down the shutter speed, set max shutter to the highest possible value.
Note
When you reduce the max gain, the image can become darker.
•
Set the max gain to a lower value.
•
If possible, move the slider under Aperture toward Open.
•
Reduce sharpness in the image, under Video > Image > Appearance.
Reduce motion blur in low-light conditions
To reduce motion blur in low-light conditions, adjust one or more of the following settings in Video > Image > Exposure:
•
Move the Blur-noise trade-off slider toward Low motion blur.
Note
When you increase the gain, image noise also increases.
•
Set Max shutter to a shorter time, and Max gain to a higher value.
If you still have problems with motion blur:
•
Increase the light level in the scene.
•
Mount the camera so that objects move toward it or away from it rather than sideways.
Maximize the details in an image
Important
If you maximize the details in an image, the bitrate will probably increase and you might get a reduced frame rate.
•
Go to Video > Stream > General and set the compression as low as possible.
•
Below the live view image, click
•
Go to Video > Stream > Zipstream and select Off.
and in Video format, select MJPEG.
7
Advertisement
Table of Contents
