Table of Contents
Advertisement
AXIS P9117–PV Corner Camera
Configure your device
4. In the list of actions, under Overlay text, select Use overlay text.
5. Select a video channel.
6. In Text, type "Motion detected".
7. Set the duration.
8. Click Save.
Send an email automatically if someone spray paints the lens
Activate the tampering detection:
1. Go to System > Detectors > Camera tampering.
2. Set a value for Trigger delay. The value indicates the time that must pass before an email is sent.
3. Turn on Trigger on dark images to detect if the lens is sprayed, covered, or rendered severely out of focus.
Add an email recipient:
4. Go to System > Events > Recipients and add a recipient.
5. Type a name for the recipient.
6. Select Email.
7. Type an email address to send the email to.
8. The camera doesn't have it's own email server, so it has to log into another email server to send mails. Fill in the rest of the
information according to your email provider.
9. To send a test email, click Test.
10. Click Save.
Create a rule:
11. Go to System > Events > Rules and add a rule.
12. Type a name for the rule.
13. In the list of conditions, under Video, select Tampering.
14. In the list of actions, under Notifications, select Send notification to email and then select the recipient from the list.
15. Type a subject and a message for the email.
16. Click Save.
Record video when the camera detects loud noises
This example explains how to set up the camera to start recording to the SD card five seconds before it detects loud noise and
to stop two minutes after.
Turn on audio:
1. Set up the stream profile to include audio, see Add audio to your recording on page 15.
Turn on audio detection:
1. Go to System > Detectors > Audio detection.
2. Adjust the sound level according to your needs.
14
Advertisement
Table of Contents
