Subscribe to Our Youtube Channel
Related Manuals for Cookology CEK601
Summary of Contents for Cookology CEK601
- Page 1 CEK601 Ceramic Hob Instruction Manual Please register the warranty for this product on www.Cookology.com...
-
Page 2: Table Of Contents
Content Safety instructions……………………………..……………........3-4 Installation……………………………..……………..........5-9 Description of the Ceramic hob surface layout…………………..9-11 Using the ceramic hob……………………………..……………....11-14 Hob guidelines……………………………..……………........14-15 Maintenance and cleaning……………………………..……………....15-16 Environmental note……………………………..……………........17... -
Page 3: Safety Instructions
Safety instructions his User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available for future reference;... - Page 4 possibility of electric shock, for hob surfaces of glass ceramic or similar General Safety material which protect live parts. ⚫ his appliance is not intended for ⚫ arning: a steam cleaner is not be use by persons (including children) used. with reduced physical, sensory or ⚫...
-
Page 5: Installation
Installation Electrical connection Before connecting the appliance, make sure that the supply voltage marked on the Rating Plate corresponds with your mains supply voltage. WARNING: THIS APPLIANCE MUST BE EARTHED. ⚫ If you have to change the oven power cord, the earthing (yellow/green) conductor must always be 10 mm longer than the line conductors. - Page 6 To ensure a correct ventilation of the hob please comply with the dimensions shows in figures . Always refer to the manufacturer for specific instructions, Make sure the surface is level and square and that no part interferes with the space required for installation.
- Page 7 Fix the brackets(4 pcs) on the front side and rear side by screw.Put the hob in the cut- out cabinet,and make it centered.Ensure that the front edge of the hob is parallel to the side edge of the work surface. ⚫...
- Page 8 50-60Hz 60Hz H05VV-F 4G2.5 H05GG-F 4G2.5 KADO XT CEK601 H05VV-F 3G2.5 H07RN-F 4G2.5 ⚫ The cable connections must be in accordance with the diagram located on the bottom of the hob. ⚫ The cable type must be connected to the corresponding power supply terminal box.
-
Page 9: Description Of The Ceramic Hob Surface Layout
➢ The “blue” neutral wire must be connected to the terminal marked with letter (N) - the live wire(L1) must be connected to the terminal marked with letter (L1) (220-240V 1N～). ➢ The “blue” neutral wire must be connected to the terminal marked with letter (N) - the live wire L1 must be connected to the terminal marked with letter (L1),. - Page 10 Display mode and control 1.1 Display mode ✓ Cooking zone working indicator: the corresponding indicator light display when the cooking zone is working; ✓ Cooking zone residual heat indicator: the corresponding indicator flashes when the cooking zone stops working (once every 1 second); ✓...
-
Page 11: Using The Ceramic Hob
Indicator Function light NO.1 cooking zone indicating digital tube:display the power level , high temperature warning symbol etc. NO.2 cooking zone indicating digital tube:display the power level , high temperature warning symbol etc. NO.3 cooking zone indicating digital tube:display the power level , high temperature warning symbol etc. - Page 12 clockwise rotation can adjust the power level from 0 to 15(maximum), and then rotate back to “0” for a circle; counterclockwise rotation can be adjusted from 0 to 15 power level, further rotation will reduce the power level, which can be reduced to minimum power level is “1”, and then rotate back to “0”...
- Page 13 7. High temperature warning ✓ Press and hold power button “ ” for 3s till switch off, the whole appliance will stop heating, but the cooking surface still has high temperature, the indicator light of the cooking zone that stops heating flashes, indicating that the corresponding heating furnace surface is hot.
-
Page 14: Hob Guidelines
The indicator lights of High temperature Replace the Insulated silicone strip NO.2/4 cooking zone protection on the of circuit panel first. If the fault display quickly (display display board NTC. persists, replace the display 0.5s/times) board . How to use the hot plate Put the pot in center of the heating zone, Turn the knob clockwise and anticlockwise to turn on the hob. -
Page 15: Maintenance And Cleaning
If these rules are not followed, then there will be a great loss of heat and energy. Heat not absorbed by the saucepan, will spread to the hob, frame and surrounding cabinets. Preferably cover pans with a lid to permit cooking at a lower heat. ... -
Page 16: Environmental Note
Sugar or food/liquid Ceramic hob scraper containing sugar Tin foil or plastic Ceramic hob scraper Fat splashes Ceramic hob cleaner Metallic Ceramic hob cleaner discolouration Water splashes or Ceramic hob cleaner water rings Important! The inside of the hob should only be washed with warm water and a small amount of washing-up liquid. - Page 17 The packaging materials that we use are environmentally friendly and can be recycled. Please discard all packaging material with due regard for the environment. Please register the warranty for this product on www.Cookology.com Cookology Limited Ground floor, 71 Lower Baggot Street, Dublin 2, D02 P593...
Need help?
Do you have a question about the CEK601 and is the answer not in the manual?
Questions and answers