Table of Contents
Advertisement
Position the headset
There are four earbuds and four
earhooks provided. One earbud and
one earhook have been attached to the
headset.
You can choose a suitable size of
earbud, earhook and an appropriate
way to position your headset.
Replace the pre-installed earbud
and earhook
1. Hold both sides of the earbud. Twist and
pull the earbud until it separates from the
earpiece.
2. Rotate the earhook to vertical direction
and then pull the earhook until it
separates from the headset.
3. Attach a earhook, and then a suitable
earbud to the headset until they fit into
place.
To wear on the right ear:
To wear on the left ear:
4. Wrap the earhook with the sponge.
10
Adjust the headset to wear on
the ear
• Hook the headset on your ear. Adjust
the angle of the headset until the
microphone is pointing towards your
mouth. Firmly grip the headset with one
hand whenever adjusting the headset
microphone up or down.
Over the head band
To attach the head band to the
headset:
1. Refer to Steps 1 and 2 in Replace
the pre-installed earbud and
earhook section to remove the
earbud and earhook.
2. Attach the headset to the headband.
3. Rotate the headset to vertical direction
until it clicks into place.
4. Adjust the head band to fit your head.
Adjust and rotate the angle of the
headset until the microphone is pointing
towards your mouth.
11
Advertisement
Table of Contents
