Sony MXD-D3 Operating Instructions Manual page 9

Basic Operations
Notes
• You cannot record over costing
rniilori.il during( t> Synchro
Recording Thu dock
mitum.ui..illy marts recording
•rom Ihr end of the exiting
material
• Vlalre Hum that the remaining
recordable lime on the VID is
longer tlwn Ihr playing time ot
the ' T> especially it you **nn» to
record all the track-' on the CD
• You cannot pauie recording
during CD Sy nchro Recording
• I he recording level specified in
tlirSttliip Menu tpnge
20)
•» no!
applied during t D Synchro-
Record mg Dm initial reference
lev el (0.0 dD) M lisevl instead
When "TOC Writing" Hashes in
the display
I he ills, k
in
ciinenlly updating the
I able t >1 Content* (Tt X i Do not
mine the de. k nr pull nut the <U
power<unt U liuugc-. «<• an VII)
made through recording arc i«aved
only when you uptime the 'It k bv
electing Ihe \1D or changing Hu*
deck to standby by pr. -.sing
It.,' t/ch r«wit. h
Do not disconnect the deck from the power source immediately after
recording
It you do, recorded material may not be saved to the MD In save the
mat trial alter recording, press £ EJECT to take out the MD or change the
deck to standby by pressing " TOC Writing" will flash at I his
time
After TOC Writing" goes out, you can pull out the AC power cord
To protect an MD against accidental erasure
To make it impossible to record on an MD. slide the tab in the direction ot
arrow, opening the slot To allow recording, close die slut
9