Sony MXD-D3 Operating Instructions Manual page 32

5
Press
AMS or YES
A flashing cursor appears in tlu* display.
6
Prr*6 TIME/CHAR to select the character type as
follows:_
To select Press TIME/CHAR repeatedly until
Uppercase IrtUi* A" appear* in the display
Lowercase li'lten* "fl" appears in the display
Numbers "0" appears In the display
Symbol* *T appears in die display
7
Turn AMS to select the character.
The selected character fkilni*
Letters, number*. symbol, and a space appear in
sequential order as you turn AMS.
You can use the following; symbols In titles
* "#*%&•<) jjc • /; ;<->?«_
9
Repeat Steps 7 and 8 until you have entered the
entire title
If you entered the wrong character
Press
or ►► until the character to lx* corns teil
starts flashing, and repeal Steps 7 and 8 to enter
tlx* correct character
To erase a character
Press m until the character to be erased
starts flashing, then press CLEAR
To enter a space*
Press AMS while the cursor in flashing.
• You cannot sclert
j
apace lor the Im.1 diameter ol the
title.
10
Press YES.
This complete the labeling procedure and the title
appear* in the display
To cancel labeling
Pm»MK\U/NOoi ■
Note
You cannot label a track or an MD while you are recording
over an onOing trade
You can pres* 11ME/C MAR to change the
character type at any time during Step 7 (see Step k
above)
8 Press AMS to enter the selected character
The selected character stops flashing and the
cursor flashes waiting for the input of the next
character
32