Sony MXD-D3 Operating Instructions Manual page 5

Getting Started
Hookups
Connecting the deck to an amplifier
Connect the amplifier to the LINK (ANAIOQ IN/
OUT jacks using the audio connecting cords (Mipphed).
making sure to match tin* color-coded cords to the
appropriate |acks on the components: red (right) to red
and white (left) to white. He sure to make connections
firmly to prevent hum and noise.
MXDD3 Amplifier
—Signal flow
Connecting the deck to a digital component such as
a CD player, DAT deck, or an MD deck
Connect the component through the Plt.lTAl
On 1C AI. IN connector with the optK.il cable
(supplied )-
Take the caps oil the connectors anil then insert the
plugs parallellv until Ihcvclkk into place
Ik- sure not to In-nd or tie the optical cable
MXD-D3 Digital component
9BBE
(
uif )
■
\JKIM
N
if— i
l_4_
^ I
Signal flow
V If "Din Unlock" and "C7r alternate In the display
I In- optical cable in not connected properly Chock that
the connection* are secure
Automatic conversion of digital sampling rates
during recording
A built-in sampling rale converter automatically
convert' the sampling trequeru-y of various digital
M.urce* in the 44 I Id lx sampling rate of this deck
TliUi allow'* you to record sxirco such os 32- and 4tv
kHx DAT or saleliito broadcasts, a*, well as compact
discs and MD>
Note
l( "Dm Unlock" alternate' with ATI .or "toimotCopy *
flashes in the display, recording through the PK.HAI
unit At IN connector Is not possible In this aur. record
the
program suiurre through the
I INI-.
(ANALOG) IN
;;kKs
with "ANALOG"
telCCted
by INPUT
Setting the voltage selector (Singaporian
model only)
Check that the voltage selector on the rear panel ol the
deck is set to the local power line voltage II not, set
tlu- selector to the correct position using a screwdriver
before connecting the AC power cord to an AC outlet.
Connecting the AC power cord
Connect the AC power cord to a wall outlet
Note
I k* not i»nrv.i the At pi*wer cord to a switched outlet
5