ZyXEL Communications NWA570N Firmware Release Notes page 9

www.zyxel.com
Fix bug 2174 -- When WPS is finished, the OTIST and EZ Config LED always light,
disable WPS, the OTIST and EZ Config LED still light and then power off/on DUT,
the OTIST and EZ Config LED will go out.
13. [BUG FIXED]
Fix bug 2175 -- Config the ssid and pre-shared key of DUT via Wireless Register, but
the Pre-Shared Key is incorrect on Current WPS Status, the SSID is incorrect on
Wirelss Setting page
14. [BUG FIXED]
Fix bug 2178 -- Enable WPS, select the mode Client's PIN, the SSID on WPS Status
page or Wireless Setting page and the Pre-Shared Key on WPS Status page may be
unrecognizable characters, the CLI will also print some unrecognizable characters,
please see the attachment
15. [BUG FIXED]
Fix bug 2179 -- On WPS Setting page the "Wifi Protect Setup(WPS) Enable " should
be " Wi-fi Protected Setup(WPS) Enable".
16. [BUG FIXED]
Fix bug 2180 -- Enable WPS and then disable it ,use a legacy STA to connect with
DUT, scan the DUT, find the encryption is WPA2-PSK,use the former key value, the
STA cannot connect with DUT
17. [BUG FIXED]
Fix bug 2181 -- When Pre-Shared Key is invalid, the web will promote "Invalid value
for Pre-Shared Key, bad length of the key", it should be "Invalid value for Pre-Shared
Key, bad length of the key!"
Modification in V1.00 (ZJ.0) b3 |2007/06/25
1. [FEATURE CHANGE]
Add WPS function.
2. [FEATURE CHANGE]
Add AES encryption in WDS mode
3. [BUG FIXED]
Fix bug 2097 -- DUT in bridge mode can not connect with Jupiter 1.1.7.0 and XG-
1020
4. [BUG FIXED]
Fix bug 2099 -- DUT in STA mode with WPA2-PSK encryption and connect to a AP.
then enable MAC clone and the connection failed
5. [BUG FIXED]
Fix bug 2101 -- On the WEB RTS/CTS Threshold value is 0~65535,but the setting
ZyXEL Confidential
:
9/13