DHW Recirculation Schedule
It is the function that can check the status of DHW recirculation timer (schedule) saved in the remote
controller.
• In the schedule list, select the DHW recirculation schedule status category, and press [OK]
button to move to the daily schedule status detail screen.
− DHW recirculation schedule can be set up to 4 times.
• Select the timer information, and press [OK] button to move to the corresponding timer's edit
screen.
NOTE
• This function is not default.
• It can be activated, after setting value in installer mode.
• The Recirculation function will only be activated, if the "Recirculation time" (installer setting) is
set additionally. Refer to Installer manual.
SCHEDULE SETTING
You can check the set
Timer time, period,
and day of week.
39