Accusys ACUTA User Manual page 60

3. Launch HyperTerminal from the desktop of
the host computer (Start > Programs >
Accessories >
HyperTerminal).
4. The Connection Description dialog box
will appear (if this is the first time you have
run HyperTerminal, you will first be
prompted to enter information about your
location). Enter a name to identify the
ACUTA connection (e.g. ACUTA) and
select an icon to represent the connection.
Press OK.
5. The Connect to dialog box appears.
Select COM1 or COM2 from the Connect
using: dropdown menu, depending on
which port is linked to ACUTA. Click OK.
6. The COM Properties dialog box will
appear. Set the following values:
Bits per second: 19,200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: Xon/Xoff
7. Click OK. The HyperTerminal connection
to ACUTA is now established.
58
Communications >
Accusys Acuta User's Manual
19200