Accusys ACUTA User Manual page 28

1. Pull the drive carrier handle to
release the latch.
2. Slide the drive carrier out of the
controller box.
3. Place the disk drive at an angle in the
drive carrier and connect the power
connector to the disk drive
4. Carefully connect the drive's IDE
connector (P-ATA HDD use only) or
S-ATA(S-ATA HDD
connector to the
connector.
5. Slide the disk drive into position in
the carrier, taking care not to damage
the IDE or S-ATA or power cables.
26
use only)
drive carrier
Accusys Acuta User's Manual