Table of Contents
Advertisement
Appendix A – FAQ
You also could see below message from the LCD:
"RAID Fail"
"Code:0" or "Code :1 <---->
The descriptions of the codes are:
Code 0: not enough number of function disks for a RAID to operate
Code 1: represents disk sequence is wrong , and the current sequence displayed within
<>
Example:
<2134>: disk 2 and disk 1 sequence is reversed.
<13x4>: the original disk 3 is put into tray 2 and the original disk 2 is not plugged or failed.
<423s>: the spare disk is put in the tray 4 and original disk 4 is put in the tray 1Disk order
error,
16. Why can't I use Acuta with Windows 98 on a USB2.0 host interface ?
We recommend user NOT to use Windows 98 because Windows 98 is too old and
not compatible with many cards. Please refer to Chapter 4, the OS compatible list
table.
49
Advertisement
Table of Contents
