Table of Contents
Advertisement
Hardware Setup
Chapter 2:
Tools and Parts for Hard Disk Installation
A screwdriver
At least one 3.5" or 2.5" SATA hard disk
(Please visit
www.synology.com
Warning:
If you install a hard disk that contains data, the system will format the hard disk and erase all data. Please
back up any important data before installation.
Install Hard Disks and SSD
Before using your Synology RackStation to store or share data, please install at least one hard disk. In addition,
RackStation offers the option to install SSD (Solid State Drives) in order to boost cache read performance. This
section will guide you through the process of installing hard disks and SSD on your Synology RackStation.
Install Hard Disks
1 Find the small button located on the hard drive tray handle. Press the button down and pull the hard drive tray
handle out as illustrated below.
2 Remove the hard drive tray and place the hard disk in as follows:
3.5" Hard Disks: Place the hard disk in the hard drive tray. Turn the tray upside down and tighten screws
into the four spots indicated below to secure the hard disk.
7
for compatible hard disk models)
C h a p t e r
2
Advertisement
Table of Contents
