Left Pod Bracket; Thread-Forming Screw (5/16 X 3/4 Inch) - Toro TimeCutter 79682 Manual

2. Install the seat belt brackets to the outside of the
ROPS mounts (Figure
Note:
Install the seat belt buckle assembly with
the bent bracket toward the seat.
Figure 10
Right side shown
1. Bolt (3/8 x 1 inch)
2. Seat belt bracket
10).
g316030
3. Locknut (3/8 inch)
3. Install the right pod bracket to the machine
frame using 2 thread-forming screws (5/16 x 3/4
inch) and the parts removed in
Machine (page 3)
4. Install the left pod bracket to the machine frame
using 2 thread-forming screws (5/16 x 3/4 inch)
as shown in Figure

1. Left pod bracket

2. Thread-forming screw
(5/16 x 3/4 inch)
9
1 Preparing the
as shown in Figure 3.
10.
Figure 11
3. Shoulder bolt
g471592