Toro TimeCutter 79682 Manual page 8

2. Install the left pod bracket to the machine frame
using 2 thread-forming screws (5/16 x 3/4
inch) and the parts removed in
Machine (page 3)
Figure 6
1. Left pod bracket
2. Thread-forming screw
(5/16 x 3/4 inch)
1 Preparing the
as shown in Figure 6.
3. Shoulder bolt
3. Install new right pod bracket to the machine
using a thread-forming screw (5/16 x 3/4 inch)
and the shoulder bolt removed in
the Machine (page
g471592
1. Thread-forming screw
(5/16 x 3/4 inch)
2. Right pod bracket
6
1 Preparing
3).
Figure 7
3. Shoulder bolt
g310256