Gardner Denver VS200-250B Operating And Service Manual page 61

Variable speed single stage stationary base-mounted compressor

Table of Contents

3. Close (when provided) valve isolating compressor package from air system.

4. Identify (by position) each tube connected to the valve body and remove.

5. Remove four bolts (Item 13) securing valve body to compressor body and remove valve.

6. Inspect poppet seal (o-ring) (Item 6, 10) for wear and tear. Replace, if necessary.

7. Remove lock ring (Item 12) and pull out cover (Item 4).

8. Inspect seals (Items 9, 11) for wear and tear. Replace if necessary.

9. Reassemble inlet control valve in reverse order.

13-18-614

Page 60

Table of Contents