Hardware Specifications; Physical Specifications; Environmental Specifications - ZyXEL Communications IES-6000 Specifications

12.5u high capacity multi-service access node

Hide thumbs Also See for IES-6000:

Brochure & specs (6 pages)

Support notes (100 pages)

Specifications (6 pages)

page of 6

/ 6
Bookmarks

Hardware Specifications

IES-6000M

• 17-slot rack mountable enclosure,

19" or 23" chassis

• Maximum 16 slots for DSL line cards (slot 1 ~ 7,

8 or 9, 10 ~ 17)

• 2 slots for management and switch cards

(slot 8 & 9)

• 2 DC power input module and filter

• One FAN and dust filter module

• One Alarm Module

ALC1248G-51/ALC1272G-51

• Hot swappable 48-port/72-port ADSL2/ADSL2+

Annex A line card

• Maximum transmission rate up to 25 Mbps/

2.4 Mbps for ADSL2+

• One mini-RJ11 console port

• One gigabit backplane

• Support G.992.3 and G.992.5 Spectral Mask

• Support EOC and Overhead Channel Access

defined in G.992.3 and Rec.G.997.1

• Support the latency path function specified in

G.992.3 and G.992.5

• Support Annex L and Annex M specified in

G.992.3 and G.992.5

• Support loop diagnostic function specified in

G.992.3 and G.992.5

• Support the power management capability

specified in G.992.3 and G.992.5

• Support the capability of the Seamless Rate

Adaptation (SRA) on-line configuration

specified in G.992.3 and G.992.5

• Support ADSL2+ 2-port bonding (G.998.1)

ALC1248G-53

• Hot swappable 48-port ADSL2/ADSL2+ Annex B

line card

• Support Annex M and Annex L specified in

G.992.3 and G.992.5

• Maximum transmission rate up to 25 Mbps/

2.4 Mbps for ADSL2+

• One mini-RJ11 console port

• One gigabit backplane

SLC1248G-22

• Hot swappable 48-port SHDSL/SHDSL.bis

line card

• Support ETSI TS 101 524 V 1.2.1, ITU-T G.991.2,

ITU-T G.991.2.bis

• ATM-based multi-pair bonding (G.998.1) up to

8 ports

• Symmetric transmission rate of 5.69 Mbps/port

• One mini-RJ11 console port

• One gigabit backplane

VLC1324G-51/VLC1324G-53

• Hot swappable 24-port VDSL2 line card over

POTS and over ISDN

• Support G.993.2, G.994.1, G.997.1

• Maximum transmission rate up to 100 Mbps/

45 Mbps

• One mini-RJ11 console port

• Two gigabit backplane

• Support VDSL2 profiles 8a, 8b, 8c, 8d, 12a, 12b

and 17a

• Support frequency allocation bandplan 998

and 997

• Support U0 band, customer PSD, RFI notch,

single latency in PTM mode and INP

• Support UPBO and DPBO, Reed Solomon and

Trellis coding

• Support ADSL fall back with ADSL/ADSL2/

ADSL2+ CPE in Annex A, M, L modes

• Support IEEE 802.1ag Connectivity Fault

Management (CFM)

ELC1220G-55

• Support 20 open slots for Fast Ethernet SFP

(100BASE-FX/BX/LX/EX)

• One mini-RJ-11 console

• Aggregates layer-2 traffic from Fast Ethernet

subscribers to the chassis system

• Support Multicast VLAN, IGMP Snooping, IGMP

Filter and Static Multicast functions for MoD

services

• Support DHCP Relay, Option82 and Snooping

functions

• Support ACL, Anti-IP Address Spoofing and Anti-

MAC Address Spoofing security functions

MSC1024G/MSC1224G

• Failover-enabled Network Termination Card

• Embedded 48G, non-blocking full duplex

switching fabric

• MSC1024G supports eight 1G Ethernet uplink &

subtending ports:

- 4 optical fiber port (SFP modules) for uplink

traffic aggregation

- 2 100/1000Base-Tx interface module for

subtending

- 2 1000 Mbps interface modules (combo

design, SFP + copper) for dynamic adjustment

about subtending and uplink aggregation,

depending on the practical deployment

requirement

• MSC1224G supports two 10G (XFP) and six 1G

uplink/subtending interfaces:

- 2 optical fiber port (SFP modules) for uplink

traffic aggregation

- 2 100/1000Base-Tx interface module for

subtending

- 2 1000 Mbps interface modules (combo

design, SFP + copper) for dynamic adjustment

about subtending and uplink aggregation,

depending on the practical deployment

requirement

• One RS232 (DB-9) serial console port

• One 10/100M out-of-band Mgmt interface

• 16 Gigabit Ethernet (SerDes) backplane interface

• 16K MAC addresses

• 512 L2 multicast groups (1K scalability)

• 4K VLANs

VOP1248G-61

• 48-port VoIP line card

• Support H.248 version 2 or SIP singling protocol

• Compatible CPE including POTS phone, Fax,

Analog Modem and Pay phone

• Support G.711 a/µ, G.726, G.729 a/b G.723.1

• 20K Business Hour Call Attempts (BHCA)

• Configurable jitter buffer

• Support the generation of dial tone, second dial

tone, ringing tone (ring-back tone), busy tone,

off-hook warning tone

• Support call waiting, call hold, call transfer, return

and call back on busy

• Emergency call local route*

• Local dial available*

• MLT (Metallic loop testing for subscriber lines)

and GR-909 loop diagnostic

Physical Specifications

IES-6000M

• Dimensions: 439.2 (W) x 280.5 (D) x 543.3 (H) mm

• Weight: 15 Kg

ALC1272G-51