System Specifications - ZyXEL Communications IES-6000 Specifications

Robust Physical Safety Design
The IES-6000 supports 1+1 MSC redundancy with a failover switch time less than 1 second. In addition, voltage, temperature and FAN speed sensors are
fitted into the system. When an abnormal condition is detected, the LED displays and/or the corresponding alarms will alert administrators of the situation.
In case the system temperature rises over the preset threshold, thermal cutoff protection will kick in to shut down the system automatically.
Sophisticated OAM&P Features
The IES-6000 provides various management methods: local console port, Web-based configuration, Telnet and SNMP v1/v2/v3-based EMS (NetAtlas Access
EMS). The management functions include Alarm and Status Surveillance, Configuration management, Performance management and Fault management.
The IES-6000 allows multiple administrative accounts with 3-level access privileges. Accounts with the first-level privilege have full access to all management
objects on the Management Information Base (MIB). Second-level accounts have similar access rights except creating new administrative accounts, while
the third-level accounts are granted read-only access rights to the MIB objects. NetAtlas Access EMS also provides view-based MIB management that partial
MIB objects can be defined and accessed for customization and security reasons. In addition, Cluster Management enables multiple DSLAM administration
with single/master IP address, XML-based northbound interface is equipped to interoperate with external OSS systems.
Specifications Specifications

System Specifications

DSL Compliant
• ADSL:
- G.992.1 Annex A, G.992.3 Annex A, G.992.5
Annex A
- G.992.1 Annex B, G.992.3 Annex B, G.992.5
Annex B
Support G.992.3 and G.992.5 Spectral Mask
Support Annex M and Annex L in G.992.3
and G.992.5
Support EOC and Overhead Channel Access
Support the latency path function
Support loop diagnostic function specified
Support the power management capability
Support the capability of the Seamless Rate
Adaptation (SRA) on-line configuration
Single and Dual end loop test
G.998.1 port bonding
• SHDSL: G.991.2, G.991.2.bis, G.998.1
• VDSL2: G.993.2, G.994.1, G.997.1
ATM Traffic Management
• Support 8 PVC per DSL port
• Support UBR, CBR, rt-VBR, nrt-VBR, QoS
Mechanisms
• Support ATM Forum TM 4.0 peak cell rate traffic
parameter
• Support downstream traffic shaping function
per ATM PVC
• Support ATM F5 OAM cells for End-to-End Loop
back test (ITU-T Rec. I.610)
Performance
• Eight queues with packet priority scheduling
(SPQ, WRR)
• Support 512 IGMP multicast groups
• The maximum channel zapping processing time
is 250 ms
• DSCP to 802.1p mapping
Security
• Per Port and Per VLAN isolation
• IEEE 802.1x (Authentication)
• Rule-based packet filtering (L2 ~ L4 ACL)
• MAC count limiting
• ARP broadcast filtering
• DHCP broadcast filtering
• VLAN aware DHCP snooping
• NetBiOS filtering
• IGMP filtering
• Anti IP/MAC address spoofing
• Support TACACS+ remote authentication
VLAN
• 4094 IEEE 802.1Q compliant VLAN tagging
• VLAN stacking (Q-in-Q)
• VLAN Bridge Function (multiple PVCs to one
VLAN)(N:1)
• PVC and VLAN one to one mapping (1:1)
• VLAN Trunking (Single PVC join Multiple
VLAN)(1:N)
• Support GVRP function
Traffic Management
• Bandwidth control and Broadcast/Multicast/
Unknown Unicast control on Gigabit
Ethernet ports
• RSTP: IEEE 802.1d, IEEE 802.1w, IEEE 802.1s
• IP Bridge
• IEEE 802.3ad (Link Aggregation Control
Protocol)
• IP multicast forwarding
• IGMP v1, v2 snooping/proxy
• IGMP multicasting channel limiting
• VLAN aware DHCP snooping
• DHCP Relay Option 82 with Sub-option 1 & 2
• TR-101 compliant PPPoE intermediate Agent
• Multicast bandwidth control
• L2 ~ L4 ACL
• IGMP group count/filtering profile
VoIP Features
• Codes: G.711, G.726, G.729a/b, G.723.1
• Network signaling protocols: ITU-T H.248 v2,
SIP v2 (RFC3261)
• RTP (RFC 1889)
• RTCP (RFC 1890)
• FAX/Modem pass through (T.38) via RTP
• Tone detection and generation (bi-directional)-
RFC2833 RTP Payload for DTMF
• Echo cancellation and auto gain control (G.165,
G.168)
• VAD (voice activity detection)
• CNG (comfort noise generation)
• Caller ID generation and detection
• Supplementary services
• Local dial available
• Emergency call local route*
• Do not Disturb
• Selective/Anonymous call rejection
• Call waiting
• Call transfer (blind and attended transfer)
• Call return and call back on busy
• Off hook warning tone
Network Management
• Local management through a craft terminal
• Web-based Management Interface
• Cluster Management (Up to 8 cluster members)
• View-based Network Management
• Support XML-based North Bound Interface
NetAtlas Access EMS
• In-band and out-of-band IP interface for
management (SSH, SFTP)
• SNMP Management (through ZyXEL NetAtlas
Access EMS)
- SNMPv1/v2c/v3 agent/traps
- Standard MIBs
RFC 1213 MIB II
ADSL Line MIB (RFC2662)/Extension Line MIB
(RFC 3440)
SHDSL Line MIB (RFC 3276)
VDSL line MIB (RF3728)
Bridge MIB/Extension MIB
RMON MIB (RFC 1757)
- Vendor specific MIBs, e.g.,
Chassis Management MIB (Fan Speed,
Voltage, Temperature)