Initial Start-Up; Setting Up And Switching On - Waeco AirCon Service Center ASC1100G Operating Manual

ASC 1100G
7

Initial start-up

7.1

Setting up and switching on

1. Drive the AirCon Service Center to the workplace.
2. Lock the front wheels (6).
I
NOTE
During operation, the unit must be on a level, flat surface so that
measurements can be made correctly.
3. Connect the AirCon Service Center to the mains.
4. To switch it on, set the main switch (12) to I.
The software version number then appears in the display (1) for
several seconds:
"SW": Software status
"DB": Database
"SN": Serial number
"LF": Language file
✓ When the start-up procedure is complete, the AirCon Service Center
displays the following:
I
NOTE
Ignore any error codes which occur during commissioning (see
page 113) and skip by pressing ENTER.
EN
WAECO INTERNATIONAL
ASC1100G SW
DB
SNxxxxxx LF
Refrigerant
11:56:35
1ELU0122
lhd11701
R1340061
g. XXXX
10/03/20
Initial start-up
73