Peer To Peer Call - ZyXEL Communications P-2602R-D1A Support Notes

Enter the SIP register server's listening port for SIP in this field.
REGISTER
Server Port
If you were not given a register server port, then enter the port from the
SIP Server Port field again here.
SIP Service A SIP service domain is the domain name that comes after the @ symbol in a
full SIP URI.
Domain
Enter the SIP service domain name in this field.You can use up to 127 ASCII
Extended set characters.
User Name This is the user name for registering this SIP account with the SIP register
server. Type the user name exactly as it was given to you. Use ASCII
characters.
Password Type the password associated with the user name above. Use ASCII
Extended set characters.
Send Caller Select this check box to show identification information when you make VoIP
ID calls. Clear this check box to not show identification information when you
make VoIP calls.
Click Advanced Setup to open a screen where you can configure the
Advanced
Prestige's advanced VoIP settings like SIP server settings, the RTP port
Setup
range and the coding type.
Apply Click Apply to save your changes back to the Prestige.
Reset Click Reset to begin configuring this screen afresh.

Peer to Peer call

Topology
All contents copyright (c) 2007 ZyXEL Communications Corporation.
Prestige 2602R-D1A Support Notes
94