Download Print this page

ZyXEL Communications Prestige P660RU-T1 Firmware Release Notes page 6

Zyxel p-660ru-t1: release note
Hide thumbs Also See for Prestige P660RU-T1:

Advertisement

Symptom: there is always show testing on Web although Auto VC hunt finished and
failed.
Condition: N/A
9.[FETURE ENHANCE]
Supporting rom file back/restore via GUI .
10.[FETURE ENHANCE]
Modifying the 'Reset System' button ( Maintenance
the Device'.
Modification in V3.40(ST.2)C0 | 04/19/2005
1.
Change to FCS firmware version.
Modification in V3.40(ST.2)b3 | 04/13/2005
2.
[FEATURE CHANGE]
Symptom: Add Mbuf_Cache size for throughput improvement,
3.
[FEATURE CHANGE]
Symptom: Add FTP_MALLOC.
4.
[Bug Fix]
Symptom: VC-hunt causes sys exception.
5.
[Bug Fix]
Symptom: The UPnP shows wrong link speed on WinXP PC.
6.
[Bug Fix]
Symptom: Dialing messages shows up on console during VC-Hunt with PPPOE and
PPPOA
7.
[Bug Fix]
Symptom: If we unplug ADSL line right after the ADSL just entered "wait for init
state" than ADSL will hold on this state and doesn't switch to down state, the CPU
loading is about 20% at the same time.
Modification in V3.40(ST.2)b2 | 03/17/2005
8.
[FEATURE CHANGE]
Symptom: Add Mbuf_Cache to improve the throughput.
9.
[Bug Fix]
Symptom: ATM Priority (UBR vs. CBR) scenario not correct.
10. [Bug Fix]
Symptom: In web wizard - LAN page. Change LAN IP for 192.168.1.1 to
192.168.181.1, the PC gets IP from the device but can't use IE to access device.
11. [Bug Fix]
Symptom: NAT_RuleList page display error in Mozilla.
12. [Bug Fix]
Symptom: In Lan page if type "255.255.248.0" in IP Subnet Mask will show "Subnet
Mask error".
13. [Bug Fix]
Symptom: Apply policy route rule to menu 3.2 or 11.3, the packet from LAN or WAN
can't route to gateway set in policy rule.
14. [Bug Fix]
Symptom: Set the MIB object "sysName" fail, this object doesn't change but prompt
name of CI changed as what it set.
diagnostic General) to 'Restart

Advertisement

loading