ZyXEL Communications Prestige P660RU-T1 Firmware Release Notes page 13

ZyXEL Confidential
Condition: N/A
13. [BUG FIXED]
Symptom: Some debug messages are displayed on console while ADSL is training.
Condition: N/A
14. [FEATURE CHANGED]
Symptom: Watch dog cause system reboot.
Condition: N/A
Modification in 3.40(ST.0)b2 | 11/19/2004
1. [BUG FIXED]
Symptom: UART internal loopback test fail in HTP while baud rate is 9600
Condition: Change HTP Code Model to HTP_P660 V 0.03
2. [BUG FIXED]
Symptom: TR-048 Loop test fail.
Condition: Change modem code to 3.0.10_A_TC
3. [BUG FIXED]
Symptom: ATM priority test fail.
Condition: Change modem code to 3.0.10_A_TC
4. [BUG FIXED]
Symptom: Peak Cell Rate is incorrect.
Condition: Change modem code to 3.0.10_A_TC
5. [BUG FIXED]
Symptom: Do not support the ADSL opmode auto detection.
Condition: Change modem code to 3.0.10_A_TC
6. [BUG FIXED]
Symptom: Can not sync up with Lucent ADSL2+ line card.
Condition: Change modem code to 3.0.10_A_TC
7. [BUG FIXED]
Symptom: ADSL plug-unplug test failure.
Condition: Change modem code to 3.0.10_A_TC
8. [BUG FIXED]
Symptom: Upload RAS code from WAN side failed. Link is disconnected and can't
re-connect.
Condition: Change modem code to 3.0.10_A_TC
Modification in 3.40(ST.0)b1|10/22/2004
1. [BUG FIXED]
Symptom: The wrong ADSL standard displayed in SMT 24.2.1 for P660RU-T1
Modification in 3.40(ST.0)a3 | 09/22/2004
2. [BUG FIXED]
Symptom: The display messages of RAS starting are disorder.
3. [BUG FIXED]
Symptom: the ADSL can't sync up with ATU-C while there are FTP data pass between
LAN and USB interfaces.
Modification in 3.40(ST.0)a2 | 07/27/2004
1. [BUG FIXED]
Symptom: Do not support flash write protect.
340ST5C0.doc
13/25