: V1.03 | 04/26/2005 15:20:30 Notes: P660R/RU-T1/T3/T7 is next generation of ZyXEL P623R series with higher speed of ADSL2, ADSL2+ technology, speed up to 12Mbps (ADSL2) and 24 Mbps (ADSL2+). With dual interface of USB and Ethernet, P660R/RU-61/63/67 offers the flexible way to access the Internet.
Page 3
Modification in V3.40(ST.5)b2 | 11/1/2005 [BUG FIX] SPRID: 051021682 Symptom: The display of CI command “wan atm vc webredir” has issue. Condition: Step1: type in command “wan atm vc webredir”. It will show “usage: webredict<enable 1 | disable 0>” Step2: but type in command “wan atm vc webredir 1”, the webrediret is disable.
Page 4
Add a new page zCfgTryAgain.html. This page will be showed when DSL line has not up. Modified the zCfgPPPOE.html. Close web redirect once PPPOE user name and password are right 5 [BUG FIX] SPRID: 050817677 Symptom: MSN message support has some problem. Condition: While disable or enable UPNP function in DUT, the Windows XP MSN 6.2 and MSN 7.0 can not establish Whiteboard sharing functions.
Page 5
Modification in V3.40(ST.3)b1 | 05/19/2005 [Bug Fix] SPRID: 050505225 Symptom: While use “Full Feature” mode in NAT in GUI, and configure rule in “Full Feature”, but this NAT rule can not work. Then reboot DUT, this rule can works properly. Condition: Step1: In GUI/Advanced Setup/NAT, choose “Full Feature”.
Page 6
Symptom: there is always show testing on Web although Auto VC hunt finished and failed. Condition: N/A 9.[FETURE ENHANCE] Supporting rom file back/restore via GUI . 10.[FETURE ENHANCE] Modifying the 'Reset System' button ( Maintenance the Device'. Modification in V3.40(ST.2)C0 | 04/19/2005 Change to FCS firmware version.
Page 7
15. [Bug Fix] Symptom: ATU-R can't link up after run the Loop test script for a spell. 16. [Bug Fix] Symptom: Attainable downstream rate is 0 in ADSL2/ ADSL2+ mode, but it's normal in ADSL1 mode. 17. [Bug Fix] Symptom: ADSL sync up mode reset to default (ADSL2+) while sync up again. Modification in V3.40(ST.2)b1 | 02/21/2005 1.
ZyXEL Confidential Internal Information: Support ADSL2+ by TrendChip modem code DMT FwVer: 3.2.0.7_A_TC, HwVer: T14F7_0.0 2. Support Multiboot client V2.1 Known Issues: 1. Ethernet and USB interfaces stop while ADSL is initializing. 2. The TR-067 Loop test failure. 3. If there are two or more PVCs with CBR or VBR QOS type and the total PCR requirement exceed the line rate then the bandwidth distribution between those PVCs is unpredictable.
Page 9
ZyXEL Confidential Symptom: A problem about can’t get ip(enet encap/llc/dynamic) Condition: 1. Use”sys romreset”in SMT 24.8 2. Go to WEB wizard or SMT 4, use enet encap/LLC/dynamic ip, set the vpi/vci=0/33, then the device can’t get ip (use other vpi/vci is ok, our AUT-C set vpi/vci is 0/33).
Page 10
ZyXEL Confidential Condition: N/A [Bug Fix] SPRID: 041124036 Symptom: 1.In Menu 24.8 typing ”ip ping 192.168.8.1” (the ip address from which you can get response”.the default times of ping is three. 2.when the device get response in the first time or the second time.type”ctrl+c”.then type the Up key and Enter quickly.the system will crash and...
Page 11
Symptom: Set PPPoA encapsulation and enable nail-up. After changing user-name several times, the connection can't be dialed-up 2. [BUG FIXED] Symptom: In PPPoE passthrough, LAN broadcast packets will pass through the router to WAN. 3. [BUG FIXED] Symptom: The router can accept the CI command "ip ping 192.168.1.1.100"...
Page 12
ZyXEL Confidential message such as "free out ret = 0xFFFF". 4. [BUG FIXED] Symptom: Debug flags can't be turned on/of through the firmware downloads mechanism in Bootext (MultiBoot) Modification in V3.40(ST.0)b3 | 12/02/2004 1. [BUG FIXED] Symptom: Web browser can access the URL: http: //[Router_IP_Address]/ rpFWUpload.html without login.
Page 13
ZyXEL Confidential Condition: N/A 13. [BUG FIXED] Symptom: Some debug messages are displayed on console while ADSL is training. Condition: N/A 14. [FEATURE CHANGED] Symptom: Watch dog cause system reboot. Condition: N/A Modification in 3.40(ST.0)b2 | 11/19/2004 [BUG FIXED] Symptom: UART internal loopback test fail in HTP while baud rate is 9600 Condition: Change HTP Code Model to HTP_P660 V 0.03...
Page 14
ZyXEL Confidential [BUG FIXED] Symptom: Reset button doesn’t take effect. [BUG FIXED] Symptom: There is no information displayed in field ADSL Chipset Vendor. [BUG FIXED] Symptom: HTP test items not enough Condition: HTP only support MAC and SAR internal loop back test.
Page 15
ZyXEL Confidential System Related Command WAN Related Command Bridge Related Command System Related Command Command adjtime cbuf display baud callhist display remove clear countrycode date domainname edit enhanced errctl event display trace extraphnum display node remove reset feature display firmware...
Page 18
ZyXEL Confidential switch [on|off] addr <addr> port <port> parse [[start_idx], end_idx] brief version view <filename> wdog switch [on|off] [value] romreset server access <telnet|ftp|web|icmp|snmp|dns> <value> load disp port <telnet|ftp|web|snmp> <port> save secureip <telnet|ftp|web|icmp|snmp|dns> <ip> dump root user slot save size clear...
Page 19
ZyXEL Confidential Exit Command Command exit Ethernet Related Command Command ether config driver iface ioctl rxmod status init version pkttest disp test pncconfig WAN Related Command Command Adsl chandata close linedata open opencmd 340ST5C0.doc disp <name> clear <name> <ch_name> <num>...
Page 20
ZyXEL Confidential opmode rateadap perfdata reset Status errorsecond targetnoise vchunt hwsar disp clear Zero Status Flags debug USB Related Command Command 340ST5C0.doc adsl2 adsl2plus [on|off] sendes [value] Add <remoteNodeIndex> <vpi> <vci> <service bit(hex)> Remove <removeNodeId> <vpi> <vci> Active <yes|no> display...
Page 21
ZyXEL Confidential dump descp debug [on|off] [dbgflag] Lpbk [on|off] IP Related Command Command address loopbackaddr alias aliasdis status resolve drop flush publish dhcp client mode relay reset server status static query 340ST5C0.doc [addr] <IP1> [IP2] <iface> <0|1> <iface> <hostid> ether <ether addr>...
Page 22
ZyXEL Confidential server stats table httpd debug icmp echo data status trace discovery ifconfig ifdrop ping pong extping route status addiface addprivate drop flush lookup errcnt status adjTcp status 340ST5C0.doc name <hostname> [timeout] status table <primary> [secondary] [third] clear disp...