ZyXEL Communications P-660R-T3 V2 Release Note page 11

ZyXEL Confidential
size
clear
cmgr
trace
cnt
socket
filter
clear
disp
sw
set
netbios
ddns
debug
display
restart
logout
cpu
display
Exit Command
exit
Ethernet Related Command
ether
config
driver
cnt
iface
ioctl
mac
reg
rxmod
status
init
disp <ch-name>
clear <ch-name>
<ch-name>
[on|off]
<set>
disp
config <0:LAN to WAN, 1:WAN to
LAN, 2:LAN to DMZ, 3:IPSec
passthrough, 4:Trigger Dial> <on|off>
<level>
<iface name>
<iface name>
<iface name>
Command
Command
disp <name>
clear <name>
<ch_name> <num>
<ch_name>
<ch_name> <mac_addr>
<ch_name>
<ch_name> <mode>
<ch_name>
<ch_name>
display spt record size
clear spt data
show the connection trace of this channel
clear the connection trace of this channel
show channel connection related counter
display system socket information
clear filter statistic counter
display filter statistic counters
set filter status switch
display filter rule
display netbios filter status
config netbios filter
enable/disable ddns service
display ddns information
restart ddns
logout ddns
display CPU utilization
exit smt menu
display LAN configuration information
display ether driver counters
clear ether driver counters
send driver iface
Useless in this stage.
Set LAN Mac address
display LAN hardware related registers
set LAN receive mode.
mode: 1: turn off receiving
2: receive only packets of this interface
3: mode 2+ broadcast
5: mode 2 + multicast
6: all packets
see LAN status
initialize LAN
11/16
Home
Description
Home
Description