AEG T959M6ORS User Manual page 36

Table of Contents

Advertisement

36
www.aeg.com
Problem
Steam program
does not start.
Unsatisfactory
drying result.
The display
shows:
No wireless con‐
nection or con‐
nection often
brakes off.
The connection
with the appli‐
ance through
the AEG App
application does
not work fre‐
quently.
1) Follow the program description — see the PROGRAMS chapter .
2) See the
CARE AND CLEANING chapter.
3) Only dryers with the Dryness Level option.
4) See the HINTS AND TIPS chapter .
5) Note: After a maximum of 6 hours the drying cycle ends automatically.
6) Follow the steam program description.
14.3 Possible causes of
unsatisfactory drying results:
• The filter is clogged. Clogged filter
makes drying inefficient.
• The airflow slots are clogged.
• The drum is dirty.
Possible cause
There is no water in the container
for the steam system. Indicator is
on.
Steam load too low.
Incorrect program selection.
Incorrect load/type of the cloths.
All buttons are inactive, except the
Start/Pause.
.
The wireless home network does
not work.
The smart device or the appliance
or both are not paired with the
wireless network.
Poor or missing connection be‐
tween the tumble dryer and router.
Fill the container with the distilled
or demineralized water.
Extend the steam load.
Do the selection of the applicable
6)
program.
Use applicable load/type of
clothes.
The appliance downloads the APP
updates. Wait until the update
process is complete. If you deacti‐
vate the appliance during update, it
resumes when you activate the ap‐
pliance again.
Check wireless home network con‐
figuration. Restart the router. If
problem still exists contact your
wireless service provider.
Repeat connection configuration
steps on smart device or the appli‐
ance or both.
Assure proper connection between
the appliance and the home router.
Move the router closer to the appli‐
ance. Equip your home network
with wireless range extender.
Do not use at the same time micro‐
wave oven and remote control.
The microwave oven can disrupt
the connection signal.
• Inadequate default dryness level
settings. See chapter
default dryness level
• Room temperature is too low or too
high. Optimal room temperature is
between 18°-25°C.
Remedy
Adjustment of

Advertisement

Table of Contents
loading

Table of Contents