AEG T959M6ORS User Manual page 13

Table of Contents

Advertisement

• Pairing your smart device with
appliance to simplify the process.
Scan the QR code with QR code
scanner built-in AEG App application.
6.2 Installing AEG App
When connecting the tumble dryer to the
application, stand near it with Your smart
device.
Make sure that your smart device is
connected to the wireless network.
1. Go to the App Store on your smart
device or scan QR code (
"QR code on rating plate" ).
2. Download and install AEG App.
3. Make sure you started a Wi-fi
connection in the dryer. If not go to
the section below.
4. Start the application. Select the
country and language and login with
Your email and password. If you do
not have an account, create a new
one following the instructions in AEG
App.
6.3 Wireless connection
configuration
Before you begin the configuration
download and install AEG App
application on your smart device.
1. Push the On/Off button to switch on
the appliance.
2. Wait approximately 8 seconds.
3. Press and hold the Remote Start
button for around 3 seconds until you
hear a single 'click' sound.
The symbols:
and
display. After few seconds only flashing
symbol:
remains. Appliance is
starting up the connection, it takes
around 10 second for the wireless
module to activate. When ready the
symbol:
(Access Point) appears on
the display. Access Point is open for
around 3 minutes.
4. Configure the AEG App on your
smart device and follow the on
screen instructions to connect the
appliance to your WiFi network.
5. If the connection is established,
To switch off the wireless connection,
see chapter
touch and hold down Remote Start
button until you hear a single 'click'
sound. The symbol:
the display.
To remove the wireless credentials,
touch and hold down Remote Start
button for around 10 seconds until you
hear 2 'beeps' sound. The symbol:
appear on the
symbol is off and the
stays lit steadily.
Each time you switch the
appliance on, the appliance
attempt to connect to the
network automatically. When
the connection is established
the symbol:
flashing.
Appliance stores last
connection configuration. To
use wireless features of the
appliance the wireless
connection must be in
mode.
appears on the display.
ENGLISH
13
WiFi icon
stops
appears on

Advertisement

Table of Contents
loading

Table of Contents