DeWalt DCG409VSX1 Original Instructions Manual page 22

English
Application
Accessory Type
Wheel Type 41 (1A)
(metal)
Wheel Type 42 (27A)
(metal)
Wheel Type 41 (1A)
(masonry/concrete)
Cutting Off
Diamond Cutting
Wheel (metal)
Diamond Cutting
Wheel (masonry/
concrete)
Abrasive Wheels For
Materials Other Than
Metal Or Masonry/
Concrete
Dual Purpose
(combined
Dual Purpose
cut‑off and
Abrasive Wheel
grinding)
Flap Disc (Type 27 / Type 29)
Sanding
Flexible Abrasive
(e.g. sandpaper)
(supported by a flexible
backing pad)
20
Accessory
(Closed cut off or masonry/concrete cut off wheel guard)
(Closed cut off or masonry/concrete cut off wheel guard)
4
For acceptable diamond wheel geomtry reference Additional Information for Guards and Accessories chart.
4
For acceptable diamond wheel geomtry reference Additional Information for Guards and Accessories chart.
1
Maximum wheel thickness, 6 mm.
2
Type B guard available at additional cost from your local D
6
Rubber backing pad and sanding clamp nut (included with rubber backing pad) available at additional cost from
your local D WALT dealer or authorised D
e
guard
Type A (Closed cut off)
Type A or Type F
Type A or Type F
Type A (Closed cut off)
Type A (Closed cut off)
Type A (Closed cut off)
Type A (Closed cut off)
Type B (Grinding)
WALT dealer or authorised D
e
Guard not required
WALT service centre.
e
Correct Assembly
4
4
1
2
WALT service centre.
e
6