Removing Bowl Lid; Processing; Drive Cover - Bosch MUMS2EW01 Information For Use

Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 21
en operation
Push the swivel arm down until it
3.
engages.
→ Fig.
12
7.8 Removing bowl lid
Press the release button, raise the
1.
swivel arm slightly and hold in
place.
Lift the lid slightly at the front and
2.
pull it out towards the front.
Push the swivel arm up until it en-
3.
gages.
7.9 Processing
You can find out everything you need
to know about processing food here.
Recommended speeds
Observe the recommended speeds
for optimum results.
Setting Use
1-2
Stir in and mix ingredients.
1-2
Knead heavy dough, e.g.
yeast dough.
3-4
Beat and stir ingredients,
e.g. whipped cream.
Processing ingredients with tools
Requirements
¡ The bowl has been inserted.
¡ The required tool is inserted.
Add the ingredients to the bowl.
1.
Press the release button and push
2.
the swivel arm down until it en-
gages.
Insert mains plug.
3.
Set the rotary switch to the re-
4.
quired speed.
→ Fig.
13
Process the ingredients until you
5.
achieve the required result.
30
Set the rotary switch to
6.
→ Fig.
14
Wait until the appliance stops.
Set the rotary switch to
7.
→ Fig.
15
a The drive slowly moves until the
correct parked position is reached.
Unplug the mains plug.
8.
Tips
¡ You can change the speed at any
time during processing or interrupt

processing.

¡ Clean all parts immediately after
use so that residues do not dry on.
Adding more ingredients
To add ingredients during pro-
1.
cessing, use the filling shaft in the
lid.
→ Fig.
16
To add large quantities, set the
2.
rotary switch to
Wait until the appliance stops.
Set the rotary switch to
3.
→ Fig.
15
a The drive slowly moves until the
correct parked position is reached.
Remove the bowl lid.
4.
→ "Removing bowl lid", Page 30
Add the ingredients to the bowl.
5.
Attach the bowl lid.
6.
→ "Attaching bowl lid", Page 29
Process the ingredients until you
7.
achieve the required result.
7.10 Drive cover
Remove the protective cover to use
accessories on drive 2 or 3.
Removing drive cover
Lift the protective cover of drive 2
1.
by the side lug and remove.
→ Fig.
17
⁠ .
and hold.
⁠ .
and hold.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Mums2 seriesMum 2 series

Table of Contents