Cleaning The Condensation Channel And Drainage Hole; Removing The Fittings - Bosch KUW21 Series User Manual

en Cleaning and servicing
Do not use harsh or abrasive de-
▶
tergents.
Do not use cleaning products with
▶
a high alcohol content.
If liquid gets into the drainage hole,
the evaporation pan may overflow.
The rinsing water must not get into
▶
the drainage hole.
If you clean fittings and accessories
in the dishwasher, this may cause
them to become deformed or discol-
our.
Never clean fittings and accessory
▶
in the dishwasher.
Prepare the appliance for cleaning.
1.
→ Page 15
Clean the appliance, the fittings,
2.
the accessories and the door seals
with a dish cloth, lukewarm water
and a little pH-neutral washing-up
liquid.
Dry thoroughly with a soft, dry
3.
cloth.
Insert the fittings.
4.
Electrically connect the appliance.
5.
16
12.3 Cleaning the condensa-
tion channel and drain-
age hole
Regularly clean the condensation
channel and drainage hole to ensure
that the condensation can drain.
Carefully clean the condensation
▶
channel and the drainage hole,
e.g. using a moistened cotton bud.
12.4 Removing the fittings
If you want to clean the fittings thor-
oughly, remove these from your ap-
pliance.
Removing the bottle shelf
Slightly lift the rear of the bottle
▶
shelf and remove it ⁠ .