Sorting Settings - East Tester ET51 Series User Manual

3.2.3 Read Measurement Results
In continuous trigger mode without the sorting function being
enabled, measurement results can be read directly from the display
screen as shown below:
In single trigger mode with 232/485 connected, results can be
read through the obtained return values.

3.3 Sorting Settings

3.3.1 Data Display Status
The sorting function offers two data display modes: direct reading
(direct display) and percentage (displaying relative values in percentage).
The percentage mode becomes functional only after nominal values have
been configured. This product also features a sorting output function (see
external interface for details). Once upper and lower limits/nominal
values are configured, the sorting results can be output to external devices
through the interface during measurement. The percentage display range
from -99.99% to 99.99%.
16