Table of Contents
Advertisement
●
Signal Settings
Set the details regarding input signal, such as the screen display size and color format.
Function
Window Selection
Picture Expansion
Setting Value
Left
Select the application range for the signal settings.
When using PbyP display, select this range first.
Right
• "Left"
The setting is applied to the left screen.
• "Right"
The setting is applied to the right screen.
Note
• Enabled only during PbyP display.
• For details on PbyP, see
(page
*1
Auto
The screen size of the monitor display can be changed.
Full Screen
• "Auto"
Aspect Ratio
The monitor automatically changes the screen size
Dot by Dot
according to the aspect ratio and resolution information
from the PC.
• "Full Screen"
Images are stretched to full screen. Since aspect ratios are
not maintained, images may be distorted in some cases.
• "Aspect Ratio"
Images are enlarged to full screen without changing the
aspect ratio. Since aspect ratios are maintained, blank
horizontal or vertical borders may appear.
• "Dot by Dot"
Displays the image at the set resolution or size specified by
the input signal.
Note
• Example settings
Description
"2-2. Switching Input Signals"
13).
- Full Screen
- Aspect Ratio
- Dot by Dot
(input signal)
Chapter 3 Advanced Adjustment / Setting
21
Advertisement
Table of Contents
