Silvercrest SHM 600 A1 Operating Instructions Manual page 87

Troubleshooting
Defect
The images are blurry.
The LED ERR
up when scanning a
document.
The LED ERR
up after switching the
appliance on.
NOTICE
► If you cannot solve the problem with the aforementioned methods
please contact Customer Service.
SHM 600 A1
Possible cause
The scanner lens is
dirty.
lights
The scanning speed is
too high.
lights
The calibration data
has been reset.
Solution
- Clean the scanner
lens with the cleaning
cloth.
- Recalibrate the
appliance.
To cancel, press the
/SCAN
button
and try to scan the
document again at a
slower speed.
Recalibrate the
appliance.
GB
85