Kenwood KR-V6020 Instruction Manual page 15

TUNED indicator
{Lights when the station frequency is received.)
MEMORY indicator
Display section
Frequency display
Direct tuning
This method allows the desired frequency to be entered directly
using the numeric keys, without using the TUNING key.
1. Press the DIRECT key.
2. Enter the frequency of the desired station with the nu-
meric keys.
@ When all of the digits of the frequency have been en-
tered, the station is automatically received.
@ \fthe entered frequency is not in the receivable frequency
range, the frequency display blinks for about 5 seconds,
and the last station received is received again.
@ Preset tuning
By storing the frequencies of broadcasting stations in the preset
channels according to the instructions in the ''To preset sta-
tion frequencies' section, any of the preset stations can be
received by one-touch operation.
Press the numeric key corresponding to the
preset channel of the desired station.
® The display shows the frequency of that station, and the
station is received.
AUTO STEREO TUNED MEMORY MSURROUND
: riod mo GE TAPE 2
aM FED PITT ETE SD PT de VIDEO
FM 2 :: Pir o$ af boos 7
FM 7 "hele" "antes™ Tal wee MHz ER
Numeric (1 ~ 10/0) keys
MEMORY key
14.18 16
23 1? 19
BAND key
P.SCAN key DIRECT key
@ To preset station frequencies
1. Press the BAND selector key for the desired band (FM1,
FM2 or AM).
2. Tune in the desired station following the instructions in
the ''Tuning methods"' section.
3. Press the MEMORY key.
@® The !|MEMORY| indicator on the display lights.
4. Within 5 seconds after pressing the MEMORY key, press
the numeric key (1 to 10/0) corresponding to the preset
channel in which the frequency is to be stored.
@ |f a frequency has already been stored under the select-
ed preset channel, the previously-stored frequency will
be replaced by the new frequency.
5. Preset all desired frequencies by repeating steps 1 to 4
above.
@ Preset Scan
This function allows the preset stations stored in the preset
channels to be received in sequence for 5 seconds each.
1. Press the P.SCAN key.
@ The frequency of each preset station is received for 5
seconds in sequence. A preset channel in which no sta-
tion has been preset is skipped, and the scan operation
moves to the next preset channel.
2. To stop Preset Scan, press the P.SCAN key again.
@ The preset station being received when the key is pressed
is received continuously.
KR-v6020 (En) 15