Table of Contents
Advertisement
POWER key
KENWOOD
aupio-vineo steno RECEIVER KR-V6020
(AM. 10/FM.20 PRESETS
MEMORY.
EVARIABLE LOUDNESS.
CONTROL
DISCRETE POWER.
AMPLIFIER CIRCUITAY
CO DIRECT
2
2 BASS
4
4
6
6
8
8
=10
10+
PHONES jack
INPUT SELECTOR
keys
SPEAKERS
selector
DOLBY SURROUND
key (Except for Europe.)
Press this key to activate or deactivate the surround output.
DOLBY surround mode is automatically entered when this key
is pressed.
SPEAKERS A and B switches
Selects the speaker system to be used for listening.
Note:
>
When the SPEAKERS A and B switc. .es are both used at the same
time, the speakers connected to the SPEAKERS A and B terminals
are connected in series. Therefore, whenever using the SPEAKERS
A and B switches at the same time, be sure that two pairs of speak-
ers are connected to the A and B terminals, otherwise no sound
is output.
PHONES jack
This jack accepts the standard stereo headphone plug.
When you wish to listen through headphones alone, set the
SPEAKERS switches (A and B) both to the OFF ({1) position.
@ To record an input source
1. Press the POWER
key to ON.
2. Select
the
source
to be recorded
with
the INPUT
SELECTOR keys.
3. Play the source.
4. Set tape deck 1 and/or tape deck 2 to record mode.
Note:
When a tape deck is connected to this unit with a System Control
cord, all of the input selector keys are disabled during recording
and do not function until recording is finished. This will prevent the
recording from being interrupted.
CD DIRECT key
VOLUME CONTROL knob
"/OLUME CONTROL
Vv TUNING
A
——
co
Seu)
SURROUND
REAR LEVEL INPUT BALANCE
4
&
LOUDNESS
BALANCE | 7
ey
O:
©;
©. ©
7
7
s
MIN:
L
R
oO
ale
OR,
ts
MAK
——————
————————————e
BALANCE
control knob
SURROUND
key
Hi Operations using CD DIRECT key
To enjoy more pure and high-quality sound of Com-
pact Discs:
1. Press the CD key.
2. Press the CD DIRECT key.
3. Play the CD player.
® The CD DIRECT key is given priority over the setting of
the input selector keys.
@ To cancel the CD DIRECT input, press the CD DIRECT
key again or press one of the INPUT SELECTOR keys (ex-
cept CD and TAPE 2 keys). The input will be switched
to the source indicated on the display.
M@ Tape dubbing
Tape recordings may be duplicated (dubbed) easily using two
tape decks connected to the TAPE
1 and 2 jacks.
For example:
(TAPE 1 to 2):
1. Connect two tape decks to the TAPE 1 and TAPE 2 jacks.
2. Press the TAPE 1 key.
3. Play back the recorded tape and adjust the recording lev-
els before starting tape dubbing.
(TAPE 2 to 1):
1. Press the TAPE 2 key.
2. Press a key other than TAPE 1 of the INPUT SELECTOR
keys such as CD.
3. Play back the recorded tape and adjust the recording lev-
els before starting tape dubbing.
4. Do not press the TAPE 1 key during recording with tape
deck 1.
Note:
Adjust recording levels on the deck that is making the copy using
that deck's operating controls.
]
KR-V6020 (En) 13
Advertisement
Table of Contents
