Panasonic MC-V9620 Operating Instructions Manual page 11

Hide thumbs Also See for MC-V9620:

CLEANING EXTERIOR AND ATTACHMENTS

1. Unplug cord from wall outlet. DO NOT drip water on cleaner.

2. Clean exterior using a clean, soft cloth that has been dipped in a solution of mild liquid detergent and

water, then wrung dry. Wipe dry after cleaning.

3. To reduce static electricity and dust build-up, wipe outer surface of canister and attachments.

4. Wash attachments in warm soapy water, rinse and air dry. Do not clean in dishwasher.

DO NOT USE ATTACHMENTS IF THEY ARE WET.

7'Ҹ CAUTION

Attachments used in dirty areas (under a refrigerator) should not be used on other

surfaces until they are washed. They could leave marks.

POWER NOZZLE CARE

Always follow all safety precautions when cleaning and servicing the POWER NOZZLE.

WA R N || М а

Electrical Shock Or Personal Injury Hazard

Disconnect electrical supply before servicing or cleaning the unit. Failure to do so

could result in electrical shock or personal injury from cleaner suddenly starting.

LIGHT BULB CHANGING

NW CAUTION

Do not use a bulb rated over 15W. During extended use, heat from the bulb could

overheat the surrounding plastic parts.

BELT CHANGING AND AGITATOR CLEANING

Disconnect cleaner from electrical outlet. Check and remove hair, string and lint build-up frequently in

the POWER NOZZLE brush and agitator support areas. If build-up becomes excessive, disconnect POWER

NOZZLE from wand and follow the steps on page 10.