Advertisement
(See Fig. J.)
@ Disc tray
The disc tray can be closed by again pressing the OPEN/CLOSE
button,
or
by gently pressing the front edge of the disc tray, or by pressing the
PLAY button, or by pressing a numeric button.
OUT)
© Display panel
The display panel displays all of the data and symbols for operation and
programming
of the unit.
@ Disc-in indicator (DISC)
This indicator illuminates when a disc is loaded.
@) Track number display (TRACK)
This display shows the track number selected manually, and during
play the track number
now being played.
l
Time display (TOTAL/TOTAL REMAIN/SINGLE/SINGLE
REMAIN)
—
The TIME DISPLAY button can be pressed to select any of the four
time displays described below. Note that the display always returns to
"SINGLE" whenever the disc tray is opened.
ə TOTAL: This display shows the total play time of all tracks on the
disc, or the total time of all programmed tracks if the programmed-
play feature is being used.
e TOTAL REMAIN: This display shows the total play time of all
remaining (unplayed) tracks on the disc, or the total time of all
remaining (unplayed) programmed tracks if the programmed-play
feature is being used.
@ SINGLE: This display shows the time that has passed since the
beginning of play of the track now playing.
èe SINGLE
REMAIN:
This display shows the remaining
play time of
the track now playing.
Program
number/tape length display (P-/C-)
This display indicates the program number and the tape length.
Index number display (INDEX)
This display shows the index number within the track now being
played.
(6) INTRO SCAN indicator (SCAN)
This indicator illuminates during the track-introduction scanning
operation.
Play indicator ( D> )
This indicator illuminates during play. When the unit is in the pause
mode,
it flashes continously.
Advertisement
