Advertisement
10
nies
(See Fig. KJ.)
The contre! functions on the main unit and on the remote-control
transmitter are identical. (Refer to "CONTROLS AND THEIR FUNCTIONS"
for details of those controls.)
@
Battery installation
© Slide out the battery compartment cover in the direction of the arrow
and remove
it.
@ Place two batteries (size "AAA", R03) in the battery compartment.
Be
sure the baiteries are placed to face in opposite directions (as shown
in the battery compartment) so that the polarities are correct.
@® Replace the battery compartment cover and slide it in until it clicks.
æ
Remote-conirol transmitter operation range
Note that the remote-control transmitter should be faced more or less
directly toward the main unit when used, and that it should be used
within a distance of about seven meters (23 feet); there should be no
large obstacles between the remote-control! transmitter and the main unit.
Remote-contro!
sensor
a
Battery replacement
Notes:
è Batteries may leak, and damage the remote-control transmitter, if
handled incorrectly.
|
@ Use only "AAA" (R03) batteries for replacement.
e Do not mix old and new batteries.
@ Remove the batteries if the remote-control transmitter will not be used
for an extended period of time.
® Replace batteries at the first indication they are weak.
@ Never try to open a battery or heat it or throw it into a fire.
® Never connect the battery terminals by using any type of metal wire,
etc.
@ Two types of batteries (rechargeable and non-rechargeable)
are
commercially available.
Be sure to read the caution label on batteries
before using them.
Advertisement
