Advertisement
Quick Links
Brief Instructions – Offline Recording – Initialization
Scala
Polygraph
1. Preparation
Connect Scala to the PC with the
USB connection cable.
2. Start Recording
2.1
Open the MiniScreen Viewer Software by double clicking on the
MSV symbol on the desktop.
2.3
Fill out the mask with the patient's master data and then select
Start transfer.
2.5
Select the desired channel (Load channel set).
2.7
2.2
Under Record > select Initialize device (offline) or click
on the symbol
2.4
The connection to Scala will be made.
2.6
Select the desired channel set from the list.
You can initialize the device for an automatic (programmed) start
or a manual start.
Programmed start: Continue with
Manual start:
Continue with
in the navigation bar or on the dashboard.
2.8.1
2.9.1
Advertisement
Related Manuals for Lowenstein Medical Scala
Summary of Contents for Lowenstein Medical Scala
- Page 1 Brief Instructions – Offline Recording – Initialization Scala Polygraph 1. Preparation Connect Scala to the PC with the USB connection cable. 2. Start Recording Open the MiniScreen Viewer Software by double clicking on the Under Record > select Initialize device (offline) or click MSV symbol on the desktop.
- Page 2 When the recording is to be started manually, the user has to press the On/Off key on the Scala (2 seconds) to switch on the device. An ongoing recording is indicated by a green LED that flashes every four seconds.
Need help?
Do you have a question about the Scala and is the answer not in the manual?
Questions and answers