Table of Contents
Advertisement
Menu item
Reduction function
Enables a reduction of PdC noise.
Minimum pump speed
Minimum speed used value
Maximum pump speed
Maximum speed used value
O.U. function delta T
Temperature delta to be maintained with UE operation
I.U. function delta T
Temperature delta to be maintained with UI operation
The pump can function in two ways.
- Intermittent: in "winter" mode, the circulator is managed by
the
Pump mode
control panel or the room thermostat.
Continuous = in "Winter" mode the pump is always in
operation.
DHW hysteresis
Not used on this model
In winter mode the boiler, at the end of a domestic hot water
request, is ready to switch to central heating mode if there is an
active request. Timing sets a time period in which the indoor
DHW priority timing
unit waits before changing the operating mode, in order to
quickly and comfortably satisfy an additional request for
domestic hot water.
The indoor unit has an electronic timer, which prevents the
Heating start timing
burner from igniting too often in central heating mode
In central heating mode, the indoor unit performs an ignition
Heating ramp timing
ramp in order to reach the maximum output set
Heating start delay
Do not use
"Service" -> "System definition" menu
Description
Range
Default
No
Level 1
No
Level 2
10 - 100 %
60 %
VICTRIX 24 HY
40%
10 - 100 %
VICTRIX 32 HY
60%
5 - 10
5
5 - 20
10
Inter. / Cont.
Inter.
-
-
0 - 100 seconds
20 seconds
(step 10 sec)
0 - 600 seconds
180 seconds
(10 sec step)
0 - 840 seconds
180 seconds
(10 sec step)
--
--
Customised
value
87
Advertisement
Table of Contents
